APPLICATIONS Accuracy 1/10, 000 for any indicator Load cell 1 to 12 load cells 350¦¸ Frequency bands 433MH z Power consumption 270 hours under weighing mode for one load cell 350¦¸, 29 months under sleeping mode( battery should be recharged every 5 months)
Range 100 meters Load cell and Indicator wiring connection 1 +Excitation 2 +Signal 3 -Signal 4 -Excitation 5 Shield Receiver Excitation 5-15V v33 Output 3mV/V Transmitter Excitation 3.3v Input <12.9 mv Power 4V-6V
Enclosure: Aluminum 110x76x30mm Turn on/off: Remote On/Off through weighing indicator. Power supply: AC/DC Rechargeable battery. LED light Red: Low voltage alarm. The battery needs to be recharged when it is on. Green: Signal status. Under normal working mode, the Green light on both transmitter and receiver will flash very fast. It means the signal is good, when the receiver lose signal, the Green LED light will flash slowly to search signal, at the same time, the transmitter will enter sleeping mode. When receiver back to the signal area, the transmitter will be activated automatically, the both Green light will flash normally. Yellow on Receiver: When the indicator is powered on, the yellow light will be on, it means the system is working Yellow on transmitter: It will be on when the AC is on (battery recharging), the Yellow light will change to Green when battery fully recharged.
Note: Please keep the ON/OFF on transmitter always be on, unless it can not work normally, In this case, Re-start the system.
Wireless Box( indicator to remote display) One pair of wireless box: One for transfer and one for received Can be used for any indicator to any remote display with RS232 communication Baud rate can be chosen before deliver.
(according to the indicator and display )
5-9V you can be supplied from outer or supplied by indicator PC |